Yulong - Global Advanced Pellet Machine Factory Of Biomass Pellet Equipment Since 1988
Language

Wood crusher machine has a wide range of raw materials. Round wood, scrap, branches and other sizes materials. The largest model can directly crush round wood with a diameter of 50 cm. Biomass crusher machine is the preferred equipment for raw material processing before pellet processing, and it is also widely used in fuel processing in biomass power plants.


The multiple applicability of this wood crusher machine was considered in the initial design. The biomass crusher machine can according to the size of the finished product to be cut, different tool designs are selected. In the production of wood crusher machine, the wood chips broken by the adjustment of the flying knife become smaller and the biomass crusher machine can be directly used for drying, which reduces a coarse powder link without reducing its output, thereby reducing the production cost of pellets.


YULONG biomass crusher machine is widely used in fuel processing in biomass power plants, wood crusher machine for sale.


  • High Quality Mobile Wood Chipper / Diesel Wood Crusher YULONG High Quality Mobile Wood Chipper / Diesel Wood Crusher YULONG
    YULONG TR-B mobile wood chipper crusher is good at cutting log wood, wood branches, and other wood materials into small wood chips, the efficiency is higher than other similar products.The XP series wood chipper, use diesel engine, so it is no need electricity, it can working outside the factory, and can working in the forest. Under the bottom of the machine, there are 2 wheels, which can use tractor to move the machine very easily.The output wood chips size is 10-30mm, finished chips used as fuel of boiler, stove.It is the ideal equipment for wood process factory, and bio-energy process factory.
  • YULONG  Wood Logs Chipper Shredder Crusher YULONG Wood Logs Chipper Shredder Crusher
    Wood chipper is used to make wood chips, wood pieces which specially designed for round logs, square blocks ,wood staff and so on. The efficiency is much higher than the ordinary one.Operation easy ,maintanence simple, life long znd the noise is low. They would be the best choice for factories and families which deal with wood scraps. It is your best choice to process wood products and sawdust.
  • Wood Hammer Mill for Sawdust and Wood Pellet Processing Grinders Wood Hammer Mill for Sawdust and Wood Pellet Processing Grinders
    Our GXP series high-efficiency hammer mill can be widely used in biomass energy and feed processing industries. It can crush wood chips, wood shavings, fibrous materials such as wheat straw and corn stalks after crushed by rotary cutter , as well as feed materials such as corn. According to the requirements of customers in different industries, can select different hole screen to ensure the size of the finished product after crushing.1.A complete set of high-efficiency hammer mill includes the main hammer mill, air fan,cyclone, air lock, bags dust collector etc.2.The main component of the hammer mill rotor, undergoes dynamic balance verification before assembly to ensure the stability of the machine during operation.3.The hammer mill motor base assembly platform and the rotor spindle bearing seat assembly platform are processed simultaneously by a large-scale CNC machine tool to ensure horizontal accuracy, thus ensuring the smooth operation of the machine.4.The hammers of the hammer mill is made of manganese steel, two of which are welded with wear-resistant alloy steel materials, which improves the service life of the hammers and reduces the cost.5.The operating doors on both sides of the hammer mill can be opened in translation for easy maintenance and replacement of the screen.6. The high-efficiency hammer mill screen is composed of two pieces. After installation, the overall discharge angle is close to 360 degrees, the discharge area is large, and the production efficiency is high.7.The hammer mill can be equipped with two cyclone according to customer requirements. This installation method allows the dust-containing gas to pass through the secondary cyclone and enter the bags for dust removal, making the filtration more adequate.8. The connecting pipe between the hammer mill and the auxiliary equipment adopts double flange connection, which is more convenient, easy to operate and has better sealing performance.9. Our hammer mill has various models with different output, and the output of a single machine is from 1ton to 8ton, which can meet various requirements.10.The moisture of the material is the main factor to affect the crushing efficiency of the hammer mill. The drier the material, the smaller the size of the finished product.
  • Yulong Building Template Crusher All-in-one Crushing and Fine Crushing Machine Wood Crusher Yulong Building Template Crusher All-in-one Crushing and Fine Crushing Machine Wood Crusher
    Our GXP series high-efficiency hammer mill can be widely used in biomass energy and feed processing industries. It can crush wood chips, wood shavings, fibrous materials such as wheat straw and corn stalks after crushed by rotary cutter , as well as feed materials such as corn. According to the requirements of customers in different industries, can select different hole screen to ensure the size of the finished product after crushing.
  • Yulong Log Branches Chips Crusher GXP75*120 Hammer Mill 132KW Wood Crusher Yulong Log Branches Chips Crusher GXP75*120 Hammer Mill 132KW Wood Crusher
    The motor and rotor of this series hammer mill installed on the same base. They are directly connected by coupling. The rotor has been checked by dynamic balance test can rotate in both of forward backward direction.There are symmetrical operation door and safety interlock in both side. The operation doors are helpful to renewal thieve plate and hammers, also helpful for checking up and debugging. Feed inlet is placed in the top of crusher which can be matched with all kind of feed equipment.There is one piece of sieve plate installed at the bottom of wood hammer mill. The size of crushed material could be changed by changing different sieve plate with different hole. Normally, the finished size is from 2mm to 30mm adjustable.Spare parts of hammers and sieve plate are made by our CNC system, through high technical heat treatment.This series wood hammer mill has reasonable structure, sturdy and durable using, safety and dependable, simple installation, easy operation, tiny vibrating, high efficiency etc. advantages, which is the most ideal grinding equipment of all kinds of wood chips, wood shavings, grass, straw, stalk, corn, weeds, soybean, PVC foaming board, rubber and so on.
  • T-Rex Series Shredder & Wood Crusher Machine Supplier T-Rex Series Shredder & Wood Crusher Machine Supplier
    T-Rex Series Shredder.This is our T-Rex series shredder. It is our company's newly improved special equipment for wood shredding. It has a wide range of raw materials. Round wood, scrap, branches and other sizes materials. The largest model can directly crush round wood with a diameter of 50 cm. It is the preferred equipment for raw material processing before pellet processing, and it is also widely used in fuel processing in biomass power plants.T-Rex wood shredder is composed of feeding system, crushing system, drive motor, discharge system, hydraulic control system and electrical control system.1.Feeding chain plate, this design is stronger and more durable than the previous belt transmission.2.The front of the feed inlet is equipped with an upper feed roller. It forms a forced feed with the lower chain plate, which can effectively provide a stable material feed to the rotor.3.Equipped with a feeding safety auxiliary device, the upper and lower feedings run synchronously. By detecting the operating current of the main motor, the speed of the upper and lower feeding motors is automatically adjusted, reducing the frequency of material jams and holding machines, and ensuring the smooth operation of the equipment4.The knife roller, integral cast steel, improves the rigidity of the equipment, makes the shredding easier and more efficient. The knife roller rotor undergoes a dynamic balance test to make the machine run more stable.5.The support frame is integrally cast steel, which improves the rigidity and ensures the stable operation of the machine.6.The bottom of the machine is equipped with a discharge conveyor, and no longer considers the pit design, making the installation more flexible and convenient.The wearing parts of this machine are mainly flying knives. We use cemented carbide material, which is wear-resistant and has a long life. It reduces the frequent disassembly and assembly of knives and sharpening links, thereby reducing operating costs. The multiple applicability of this device was considered in the initial design. According to the size of the finished product to be cut, different tool designs are selected. In the production of biomass pellets, the wood chips broken by the adjustment of the flying knife become smaller and can be directly used for drying, which reduces a coarse powder link without reducing its output, thereby reducing the production cost of pellets.In view of the complexity of the raw materials on the current market, we have developed a special set of knife roller rotors to effectively crush the demolition waste, building templates and waste wooden pallets. According to the special needs of customers, the company has developed a mobile device of the same type to realize all-terrain and barrier-free operation.
  • T-Rex High Quality 10tons Per Hour Hard Wood Chipper Machine T-Rex High Quality 10tons Per Hour Hard Wood Chipper Machine
    Wood logs wood chipper BAOLONG (t-rex) wood chipping machine a special equipment for the production of wood chips, which is widely used in raw material production of biomass energy industry and fuel storage in biomass power plants Wood chipping machine Compact and reasonable structure, simple operation, high production capacity, wide adaptability of raw materials, high quality of crushing granularity, safety and reliability, convenient maintenance. Wood chipping machine can be installed different kinds of feeding system, log conveyor, Chain Conveyors, vibrating conveyor, belt conveyor for different kinds of wood, log wood, wood blocks, wood branches, etc. The outlet wood chips is about 10-30mm.
  • 10tons Per Hour Hard Wood Chipper Machine Shredder 10tons Per Hour Hard Wood Chipper Machine Shredder
    T-Rex series shredder is our company's newly improved special equipment for wood shredding. It has a wide range of raw materials. Round wood, scrap, branches and other sizes materials. The largest model can directly crush round wood with a diameter of 50 cm. It is the preferred equipment for raw material processing before pellet processing, and it is also widely used in fuel processing in biomass power plants.