Blog
Home > News > Blog
VR
  • Product Details

A high-quality equipment can run safely and stably. Before leaving the factory, it must undergo strict dynamic balancing testing. 

Yulong dynamic balancing testing area, which is responsible for the dynamic balancing testing of the rotor components of all the company's equipment.







 

Our factory has very strict workmanship requirements for products.

All rotors must pass strict dynamic balancing tests to detect their mass distribution. During the entire process, we need to repeatedly debug the weights. The maximum allowable error in mass cannot exceed 5 grams, and is generally controlled below 3 grams. We will use computers to perform precise measurements. If the error range is exceeded, we need to re-weight according to the error to make the mass distribution of the entire component balanced and stable,and then assemble it to ensure that customers can operate the equipment more safely and stably.

The rotor of the high-efficiency hammer mill after dynamic balancing testing can ensure the stability of the high-efficiency hammer mill during operation and greatly reduce a series of failures caused by excessive vibration of the equipment.

All products of Yulong Company are produced and sold by the factory. The quality is traceable and guaranteed. If you want to know more about Yulong's processing details, please come to Yulong factory for an on-site inspection.






 Professional The secret of a machine's safe and stable operation lies here——ynamic balancing testing manufacturers    

Company Advantages

01
Our company has professional installation engineers team and specialized after-sale service team. When the machinesarrive your factory, we will send our installation engineers to your factory Our engineers will Guide you to install the machinesand training your workers how to operate the machines and maintain the machine.
02
We have first-rate design ability ,first-rate product supply ability, first-rate installation service,first-rate product quality control standards,first-rate program comparison optimization ability and first-rate customer service consciousness.
03
YULONG was founded in August 1988.YULONG has 32 patents on its own R&D products, has passed the ISO9001 quality management system certification, EU CE ,SGS certification and so on

Certifications and Patents

Certificate
Certificate
Certificate
Certificate
Certificate

Frequently Asked Questions about

Q:

How to Assemble / Disassemble the Pellet Mill        

A:

We have a detailed Assemble / Disassemble Instruction Video, please click the link to view:https://www.woodpelletmill.net/service

Q:

Precautions Before Installation and Commissioning        

A:

① Site preparation: whether the handling tools, hoisting tools, assembly tools, water and electricity are complete, whether the raw materials are in place, and whether there are obstacles (columns, roofs) on the installation site; ② Determine the operating technicians and operators; ③ Confirm whether there is a pit and whether the size is correct and reasonable; ④ Check whether the issued equipment number is missing and whether the manual is complete. ⑤ According to the material granulation, whether the equipment is complete. ⑥ Explain safety common sense to the on-site staff and give technical guidance. ⑦ After the installation and debugging is completed, the customer's technicians or operators must clarify the main equipment of the production line, and follow the instructions for operation and maintenance. The set time of the dry oil pump, the maintenance simulation operation of no oil at the oil outlet.

Q:

Notes in Pellet Processing        

A:

1.Before the worker gets on the machine, the operator must read the instruction manual carefully to understand the various technological processes of the equipment. 2.In the production process, strictly follow the procedures and operation sequence, and carry out the installation operation as required. 3.The main equipment needs to be installed and fixed on a flat concrete floor and fixed with screws. 4.Smoking and open flames are strictly prohibited at the production site. 5.After each boot, it needs to be idle first. After the equipment runs normally without abnormality, the material can be fed evenly. 6.It is strictly forbidden to add hard impurities such as stones and metals into the feeding device. In order to avoid damage to the granulation chamber, iron should be removed before granulation. 7.It will be dangerous, if the material is moved by hand or other tools during the operation of the equipment. 8.If abnormal noise occurs during the production process, the power supply should be cut off immediately. After checking and handling the abnormal situation, the production can continue. 9.The feeding must be stopped first, and then the machine should be shut down. After the raw materials of the feeding system are processed, the power supply should be cut off.

Q:

General questions to design the production line for you?        

A:

1. What is your raw materials? (to confirm mould pressure ratio of machines )   2. What is the moisture content of your raw material?3. How many output capacity do you want per hour / month/ year? Note: If the moisture is high, you need a dryer, becuase the suitable moisture content to enter pellet machine is 13-15%. Andplease provide us above detailed information, then we would design the most suitable production line with reasonble offers.

Q:

Will you send engineers to install the machines?        

A:

Of course. Our company has professional installation engineers team and specialized after-sale service team. When the machinesarrive your factory, we will send our installation engineers to your factory Our engineers will Guide you to install the machinesand training your workers how to operate the machines and maintain the machine.


Basic Information
  • Year Established
    --
  • Business Type
    --
  • Country / Region
    --
  • Main Industry
    --
  • Main Products
    --
  • Enterprise Legal Person
    --
  • Total Employees
    --
  • Annual Output Value
    --
  • Export Market
    --
  • Cooperated Customers
    --

Recommended

Send your inquiry

GET IN TOUCH WITH US 

Just leave your e-mail or phone number in the contact formso we can send you a free quote for our wide range of designs!

Recommended

ULONG is a pellet machine factory, which has mature biomass pellet equipment production and processing design experience and has users all over the world.

Chat with Us

Send your inquiry

Choose a different language
╳
English
Tiếng Việt
Türkçe
ภาษาไทย
bahasa Indonesia
हिन्दी
русский
Português
한국어
français
Español
Deutsch
العربية
Current language:English