Yulong - Global Advanced Pellet Machine Factory Of Biomass Pellet Equipment Since 1988.
Language
Yulong - Global Advanced Pellet Machine Factory Of Biomass Pellet Equipment Since 1988.
Hammer mills are a sort of size reduction machine that is used to break down granular materials that are too large. Breaking down large materials aids in the production of feedstock with an optimal particle size distribution.
In nutshell, wood hammer mill is a type of multipurpose wood crushing machine that can be used to grind small diameter materials such as corn straw, branches, herbs, and other materials with a diameter of less than 50mm and a fineness of 3-5mm after grinding. It is widely used in wood pellet plants and biomass briquette manufacturing lines because of its advanced technology, high quality, and reasonable pricing.
Here are some ways to choose the right wood hammer mill that suits your industry standards.
1. Small Hammer mill - As the screen cloth covers the lower part of the rotor in a semicircle, the small hammer mill is also known as a half-screen hammer mill. The upper body is where the toothed plate is mounted. Raw materials are supplied into the crushing chamber along the tangent line.
A general type of hammer mill is the little hammer mill. It can adjust to a variety of operating settings. Farms, tiny feed mills, small pellet production lines, and wood processing plants all use small hammer mills.
2. Pneumatic discharge hammer mills (PDHM) - Even though they perform the same functions, the chamber walls and hammers of a pneumatic discharge hammer mill are thinner than those of gravity discharge mills. The plate dashboard at PDHM aids in material size reduction, and the air evacuation procedure utilized for discharge improves total production. This hammer mill is ideal for lightweight materials such as paper, greenwood, biomass, and so on.
3. Full circle screen hammer mills - The 300-degree rotating screen on these industrial hammers helps to improve particle evacuation. They are great for lightweight components that don't need to be ground down beforehand. Spices, grasses, and other materials are hammered in these hammer mills.
This was our take on how you can choose the right pellet machinery or we can say wood hammer mill that suits your needs.
Product Introduction
YULONG GXP Series Biomass Hammer Mill
Our GXP series high-efficiency hammer mill can be widely used in biomass energy and feed processing industries. It can crush wood chips, wood shavings, fibrous materials such as wheat straw and corn stalks after crushed by rotary cutter , as well as feed materials such as corn. According to the requirements of customers in different industries, can select different hole screen to ensure the size of the finished product after crushing.
Advantages
▶The motor and rotor of this series hammer mill installed on the same base. They are directly connected by coupling. The rotor has been checked by dynamic balance test can rotate in both of forward backward direction.
▶There are symmetrical operation door and safety interlock in both side. The operation doors are helpful to renewal thieve plate and hammers, also helpful for checking up and debugging. Feed inlet is placed in the top of crusher which can be matched with all kind of feed equipment.
▶There is one piece of sieve plate installed at the bottom of wood hammer mill. The size of crushed material could be changed by changing different sieve plate with different hole. Normally, the finished size is from 2mm to 30mm adjustable.
▶Spare parts of hammers and sieve plate are made by our CNC system, through high technical heat treatment.
▶This series hammer mill has reasonable structure, sturdy and durable using, safety and dependable, simple installation, easy operation, tiny vibrating, high efficiency etc. advantages, which is the most ideal grinding equipment of all kinds of wood chips,wood shavings, grass, straw, stalk, corn, weeds, soybean, PVC foaming board, rubber and so on.
Advantages
The wearing parts of this machine are mainly flying knives. We use cemented carbide material, which is wear-resistant and has a long life. It reduces the frequent disassembly and assembly of knives and sharpening links, thereby reducing operating costs.
The multiple applicability of this device was considered in the initial design. According to the size of the finished product to be cut, different tool designs are selected. In the production of biomass pellets, the wood chips broken by the adjustment of the flying knife become smaller and can be directly used for drying, which reduces a coarse powder link without reducing its output, thereby reducing the production cost of pellets.
Certification
CE Certificate
ISO 9000 Certificate
Please leave your email or WhatsApp, we will contact you as soon as possible.
GET IN TOUCH WITH US
Just leave your e-mail or phone number in the contact formso we can send you a free quote for our wide range of designs!
Recommended
ULONG is a pellet machine factory, which has mature biomass pellet equipment production and processing design experience and has users all over the world.
Shandong YULONG machine Co,Ltd. is an integrated enterprise with product development, design, manufacturing, training, and trade.
